Tools Cross-Validation

Table of Contents | Previous | Next | Index

Cross-Validation Tool

You use the Cross-Validation tool to:

• Assess the optimal complexity of a model (for example, the number of principal components in a PCA or PCR model, or the number of latent variables in a PLS model).

• Estimate the performance of a model when you apply the model to unknown data.

For a given set of data, cross-validation involves a series of steps called subvalidation steps in which you remove a subset of objects from a set of data (the test set), build of a model using the remaining objects in the set of data (the model building set), and then apply the resulting model to the removed objects. You note how the errors accumulate as you leave out samples to determine the number of principal components/latent variables/factors to retain in the model. Cross-validation typically involves more than one subvalidation step, each of which in turn involves the selection of different subsets of samples for model building and model testing. In Solo, five different cross-validation methods are available, and these methods vary with respect to how the different sample subsets are selected for these subvalidation steps.

1. To open the Cross-Validation tool, do one of the following:

• On the Analysis window, click Tools > Cross-Validation.

• Click the Cross-Validation icon in the Analysis window.

Note: You must load data into the Analysis window before the Cross-Validation icon is available.

Cross-validation icon in the Analysis window

• In the Analysis window Flowchart pane, click Choose Cross-Validation.

2. In the Cross-Validation dialog box, select the method of cross-validation that you want to use.

Cross-Validation dialog box

3. Use the slider bars to change the default values for the available parameters.

Note: Not all parameters are relevant for all cross-validation methods. The initial values that are specified for the available parameters are default values that are based on the dimensionality of the data. You can click Reset at any time to reset the parameters to their default settings. For the following descriptions:

• n is the total number of objects in the set of data.

• s is the number of data splits specified for the cross-validation procedure, which must be less than n/2.

• r is the number of iterations.

Cross-validation methods compared

'

Leave One Out

Venetian Blinds

Contiguous Block

Random Subsets

Custom

Cross-validation method

Description

The default value. All samples in the set of data are used to build the model.

Each test set is determined by selecting every sth object in the set of data, starting at objects numbered 1 through s.

An alternative to Venetian Blinds. Each test set is determined by selecting contiguous blocks of n/s objects in the set of data, starting at object number 1.

"s"� different test sets are determined through random selection of n/s objects in the set of data, such that no single object is in more than one test set. This procedure is repeated "r"� times, where "r"� is the number of iterations.

You manually define each of the test sets. You can assign specific objects in your set of data in one of three ways:

• To be in every test set.

• To never be in a test set.

• To not be used in the cross- validation procedure at all.

Available Parameters

Maximum Number of LVs

• Maximum Number of LVs

• Number of Data Splits

• Maximum Number of LVs

• Number of Data Splits

• Maximum Number of LVs

• Number of Data Splits

• Number of Iterations

• Number of data splits

• Object membership for each split

• Total number of objects

1. of Subvalidation Steps

n

s

s

(s*r)

s

1. of Test Samples per Subvalidation

1

n/s

n/s

n/s

Varies. User-defined.

4. Do one of the following:

• Click Apply button to apply these settings and keep the Cross Validation dialog box open.

• Click OK to apply these settings and close the Cross Validation dialog box.